Zur Startseite gehen
0,00 €*
Cover: 9789819958795 | Models for Wind Tunnel Tests Based on Additive Manufacturing...
Dekorationsartikel gehören nicht zum Leistungsumfang.
Models for Wind Tunnel Tests Based on Additive Manufacturing Technology
Taschenbuch von Dichen Li (u. a.)
Sprache: Englisch

128,95 €*

inkl. MwSt.

Versandkostenfrei per Post / DHL

Lieferzeit 4-7 Werktage

Kategorien:
Beschreibung
This book systematically introduces design and fabrication of physical models for wind tunnel tests based on additive manufacturing technology, including model design technology, model fabrication process, strengthening technology, etc. On this basis, it introduces in detail the specific implementation process of commonly used models, e.g., force measurement models, pressure measurement models, elastic models, and flutter models. This book mainly provides references for researchers and engineers who are engaged in aircraft design, experimental fluid mechanics, and additive manufacturing technology research.
This book systematically introduces design and fabrication of physical models for wind tunnel tests based on additive manufacturing technology, including model design technology, model fabrication process, strengthening technology, etc. On this basis, it introduces in detail the specific implementation process of commonly used models, e.g., force measurement models, pressure measurement models, elastic models, and flutter models. This book mainly provides references for researchers and engineers who are engaged in aircraft design, experimental fluid mechanics, and additive manufacturing technology research.
Über den Autor
Dr. Weijun Zhu was born in Huozhou, China, in 1983. He received his Ph.D. degree in mechanical engineering from Xi'an Jiaotong University, 2013. He is now an associate professor at School of Mechanical Engineering and Automation, Beihang University, Beijing, China. His current research interest is 3D printing technologies (additive manufacturing) for high performance polymers and polymer-based composites with multiple functions including mechanics, electromagnetics, sensor/actuation, etc.
Professor Dichen Li was born in July 1964. He received his Ph.D. degree in 1993 at Xi'an Jiaotong University. Now Dr. Li serves as the Changjiang professor and the director of the State Key Lab for Manufacturing System Engineering at Xi'an Jiaotong University, China. He is interested in combining fabrication and biotechnology, and his main research scope covers forming of ceramic parts, direct metal forming, and biofabrication using rapid prototyping & manufacturing (RP&M) technology.
Inhaltsverzeichnis
Chapter 1. Overview of models on based on additive manufacturing.- Chapter 2. Design basis of wind tunnel test models based on additive manufacturing.- Chapter 3. Manufacturing process basis of models based on additive manufacturing.- Chapter 4. Testing Technology of models on based on additive manufacturing.- Chapter 5. Electrodeposition strengthening technology of models on based on additive manufacturing.- Chapter 6. Force measuring wind tunnel test models on based on additive manufacturing.- Chapter 7. Pressure measuring wind tunnel test models on based on additive manufacturing.- Chapter 8. Flexible wind tunnel test models on based on additive manufacturing.- Chapter 9. Flutter wind tunnel test models on based on additive manufacturing.- Chapter 10. Force measuring models with deformation similarity models on based on additive manufacturing.
Details
Erscheinungsjahr: 2024
Fachbereich: Fertigungstechnik
Genre: Importe, Technik
Rubrik: Naturwissenschaften & Technik
Medium: Taschenbuch
Inhalt: xiii
220 S.
50 s/w Illustr.
123 farbige Illustr.
220 p. 173 illus.
123 illus. in color.
ISBN-13: 9789819958795
ISBN-10: 9819958792
Sprache: Englisch
Einband: Kartoniert / Broschiert
Autor: Li, Dichen
Zhu, Weijun
Hersteller: Springer Singapore
Springer Nature Singapore
Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, D-69121 Heidelberg, juergen.hartmann@springer.com
Maße: 235 x 155 x 13 mm
Von/Mit: Dichen Li (u. a.)
Erscheinungsdatum: 16.12.2024
Gewicht: 0,408 kg
Artikel-ID: 130795034
Über den Autor
Dr. Weijun Zhu was born in Huozhou, China, in 1983. He received his Ph.D. degree in mechanical engineering from Xi'an Jiaotong University, 2013. He is now an associate professor at School of Mechanical Engineering and Automation, Beihang University, Beijing, China. His current research interest is 3D printing technologies (additive manufacturing) for high performance polymers and polymer-based composites with multiple functions including mechanics, electromagnetics, sensor/actuation, etc.
Professor Dichen Li was born in July 1964. He received his Ph.D. degree in 1993 at Xi'an Jiaotong University. Now Dr. Li serves as the Changjiang professor and the director of the State Key Lab for Manufacturing System Engineering at Xi'an Jiaotong University, China. He is interested in combining fabrication and biotechnology, and his main research scope covers forming of ceramic parts, direct metal forming, and biofabrication using rapid prototyping & manufacturing (RP&M) technology.
Inhaltsverzeichnis
Chapter 1. Overview of models on based on additive manufacturing.- Chapter 2. Design basis of wind tunnel test models based on additive manufacturing.- Chapter 3. Manufacturing process basis of models based on additive manufacturing.- Chapter 4. Testing Technology of models on based on additive manufacturing.- Chapter 5. Electrodeposition strengthening technology of models on based on additive manufacturing.- Chapter 6. Force measuring wind tunnel test models on based on additive manufacturing.- Chapter 7. Pressure measuring wind tunnel test models on based on additive manufacturing.- Chapter 8. Flexible wind tunnel test models on based on additive manufacturing.- Chapter 9. Flutter wind tunnel test models on based on additive manufacturing.- Chapter 10. Force measuring models with deformation similarity models on based on additive manufacturing.
Details
Erscheinungsjahr: 2024
Fachbereich: Fertigungstechnik
Genre: Importe, Technik
Rubrik: Naturwissenschaften & Technik
Medium: Taschenbuch
Inhalt: xiii
220 S.
50 s/w Illustr.
123 farbige Illustr.
220 p. 173 illus.
123 illus. in color.
ISBN-13: 9789819958795
ISBN-10: 9819958792
Sprache: Englisch
Einband: Kartoniert / Broschiert
Autor: Li, Dichen
Zhu, Weijun
Hersteller: Springer Singapore
Springer Nature Singapore
Verantwortliche Person für die EU: Springer Verlag GmbH, Tiergartenstr. 17, D-69121 Heidelberg, juergen.hartmann@springer.com
Maße: 235 x 155 x 13 mm
Von/Mit: Dichen Li (u. a.)
Erscheinungsdatum: 16.12.2024
Gewicht: 0,408 kg
Artikel-ID: 130795034
Sicherheitshinweis

Ähnliche Produkte

Ähnliche Produkte

Taschenbuch
Cover: 9783896538208 | Werkstoffkunde Stahl für Studium und Praxis | Wolfgang Bleck | Buch
Werkstoffkunde Stahl für Studium und Praxis
EAN: 9783896538208
Sprache: Deutsch
Von/Mit: Wolfgang Bleck

40,40 €*

Lieferzeit 1-2 Werktage

Taschenbuch
Cover: 9781409422211 | Drift into Failure | Sidney Dekker | Taschenbuch | Englisch | 2011
Drift into Failure
From Hunting Broken Components to Understanding Complex Systems
EAN: 9781409422211
Sprache: Englisch
Von/Mit: Sidney Dekker

75,10 €*

Lieferzeit 4-7 Werktage

Bundle
Cover: 9783446447356 | Produktion und Qualität | Organisation, Management, Prozesse | Bundle
Produktion und Qualität
Organisation, Management, Prozesse
EAN: 9783446447356
Sprache: Deutsch
Von/Mit: Wilfried Sihn (u. a.)

39,99 €*

Lieferzeit 1-2 Werktage

Taschenbuch
Cover: 9783865224255 | Teil C - Maschinenarbeiten Drehen - Drehtechnik | Übungsheft | Buch
Teil C - Maschinenarbeiten Drehen - Drehtechnik
Übungsheft
EAN: 9783865224255
Sprache: Deutsch
Maße: 298 x 227 x 7 mm

28,40 €*

Lieferzeit 1-2 Werktage

Taschenbuch
Cover: 9783662581995 | Übungsbuch Signale und Systeme | Ottmar Beucher | Taschenbuch | xviii
Übungsbuch Signale und Systeme
EAN: 9783662581995
Sprache: Deutsch
Von/Mit: Ottmar Beucher

39,99 €*

Lieferzeit 2-4 Werktage

Buch
Cover: 9783446461178 | Technische Mechanik für Ingenieure | Wolfgang H. Müller (u. a.) | Buch
Technische Mechanik für Ingenieure
EAN: 9783446461178
Sprache: Deutsch
Von/Mit: Wolfgang H. Müller (u. a.)

39,90 €*

Lieferzeit 1-2 Werktage

Taschenbuch
Cover: 9783662597149 | Dubbel Taschenbuch für den Maschinenbau Maschinen und Systeme | Buch
Dubbel Taschenbuch für den Maschinenbau Maschinen und Systeme
Taschenbuch für den Maschinenbau Band 3
EAN: 9783662597149
Sprache: Deutsch
Von/Mit: Beate Bender (u. a.)

89,99 €*

Lieferzeit 1-2 Werktage

Taschenbuch
Cover: 9783662642900 | Produktionsplanung und -steuerung | Thorsten Claus (u. a.) | Buch | x
Produktionsplanung und -steuerung
Forschungsansätze, Methoden und Anwendungen
EAN: 9783662642900
Sprache: Deutsch
Von/Mit: Thorsten Claus (u. a.)

59,99 €*

Lieferzeit 1-2 Werktage

Taschenbuch
Cover: 9783731512172 | Fiber-dependent injection molding simulation of discontinuous...
Fiber-dependent injection molding simulation of discontinuous reinforced polymers
EAN: 9783731512172
Sprache: Englisch
Von/Mit: Florian Wittemann

42,00 €*

Lieferzeit 2-4 Werktage

Buch
Cover: 9783802735219 | Netzmeister | Das Standardwerk für technisches Grundwissen | V. | Buch
Netzmeister
Das Standardwerk für technisches Grundwissen
EAN: 9783802735219
Sprache: Deutsch
Von/Mit: Rohrleitungsbauverband e. V.

109,00 €*

Lieferzeit 1-2 Werktage

Diese Website verwendet Cookies, um eine bestmögliche Erfahrung bieten zu können. Mehr Informationen ...