Zum Hauptinhalt springen
Dekorationsartikel gehören nicht zum Leistungsumfang.
Electronics for Vinyl
Taschenbuch von Douglas Self
Sprache: Englisch

85,30 €*

inkl. MwSt.

Versandkostenfrei per Post / DHL

Aktuell nicht verfügbar

Kategorien:
Beschreibung
Electronics for Vinyl is the most comprehensive book ever produced on the electronic circuitry needed to extract the best possible signal from grooves in vinyl. What is called the "vinyl revival" is in full swing, and a clear and comprehensive account of the electronics you need is very timely. Vinyl reproduction presents some unique technical challenges; the signal levels from moving-magnet cartridges are low, and those from moving-coil cartridges lower still, so a good deal of high-quality low-noise amplification is required.

Some of the features of Electronics for Vinyl include:

integrating phono amplifiers into a complete preamplifier;

differing phono amplifier technologies; covering active, passive, and semi-passive RIAA equalisation and transconductance RIAA stages;

the tricky business of getting really accurate RIAA equalisation without spending a fortune on expensive components, such as switched-gain MM/MC RIAA amplifiers that retain great accuracy at all gains, the effects of finite open-loop gain, cartridge-preamplifier interaction, and so on;

noise and distortion in phono amplifiers, covering BJTs, FETs, and opamps as input devices, hybrid phono amplifiers, noise in balanced MM inputs, noise weighting, and cartridge load synthesis for ultimately low noise;

archival and non-standard equalisation for 78s etc.;

building phono amplifiers with discrete transistors;

subsonic filtering, covering all-pole filters, elliptical filters, and suppression of subsonics by low-frequency crossfeed, including the unique Devinyliser concept;

ultrasonic and scratch filtering, including a variety of variable-slope scratch filters;

line output technology, including zero-impedance outputs, on level indication for optimal setup, and on specialised power supplies; and

description of six practical projects which range from the simple to the highly sophisticated, but all give exceptional performance.

Electronics for Vinyl brings the welcome news that there is simply no need to spend huge sums of money to get performance that is within a hair's breadth of the best theoretically obtainable. But you do need some specialised knowledge, and here it is.
Electronics for Vinyl is the most comprehensive book ever produced on the electronic circuitry needed to extract the best possible signal from grooves in vinyl. What is called the "vinyl revival" is in full swing, and a clear and comprehensive account of the electronics you need is very timely. Vinyl reproduction presents some unique technical challenges; the signal levels from moving-magnet cartridges are low, and those from moving-coil cartridges lower still, so a good deal of high-quality low-noise amplification is required.

Some of the features of Electronics for Vinyl include:

integrating phono amplifiers into a complete preamplifier;

differing phono amplifier technologies; covering active, passive, and semi-passive RIAA equalisation and transconductance RIAA stages;

the tricky business of getting really accurate RIAA equalisation without spending a fortune on expensive components, such as switched-gain MM/MC RIAA amplifiers that retain great accuracy at all gains, the effects of finite open-loop gain, cartridge-preamplifier interaction, and so on;

noise and distortion in phono amplifiers, covering BJTs, FETs, and opamps as input devices, hybrid phono amplifiers, noise in balanced MM inputs, noise weighting, and cartridge load synthesis for ultimately low noise;

archival and non-standard equalisation for 78s etc.;

building phono amplifiers with discrete transistors;

subsonic filtering, covering all-pole filters, elliptical filters, and suppression of subsonics by low-frequency crossfeed, including the unique Devinyliser concept;

ultrasonic and scratch filtering, including a variety of variable-slope scratch filters;

line output technology, including zero-impedance outputs, on level indication for optimal setup, and on specialised power supplies; and

description of six practical projects which range from the simple to the highly sophisticated, but all give exceptional performance.

Electronics for Vinyl brings the welcome news that there is simply no need to spend huge sums of money to get performance that is within a hair's breadth of the best theoretically obtainable. But you do need some specialised knowledge, and here it is.
Über den Autor

Douglas Self studied engineering at Cambridge University, then psychoacoustics at Sussex University. He has spent many years working at the top level of design in both the professional audio and hi-fi industries, and has taken out a number of patents in the field of audio technology. He currently acts as a consultant engineer in the field of audio design.

Inhaltsverzeichnis

Acknowledgements

Other Titles

Preface

Chapter 1: The Basics

Chapter 2: Passive Components

Chapter 3: Opamps and Their Properties

Chapter 4: Preamp Architecture

Chapter 5: Moving-Magnet Inputs: Phono Amp Architecture

Chapter 6: Signals from Vinyl: Levels and Limitations

Chapter 7: RIAA Equalisation

Chapter 8: Archival & Non-Standard Equalisation

Chapter 9: Moving-Magnet Inputs: Noise and Distortion

Chapter 10: Moving-Magnet Inputs: Discrete Circuitry

Chapter 11: Moving-Coil Head Amplifiers

Chapter 12: Subsonic Filtering

Chapter 13: Ultrasonic and Scratch Filtering

Chapter 14: Line Outputs

Chapter 15: Level Indication

Chapter 16: Power Supplies

Chapter 17: Moving-Magnet Inputs: Practical Designs

Appendix 1:Component Series E3-E96

Appendix 2: Phono Amplifier Articles in Linear Audio

Details
Erscheinungsjahr: 2017
Fachbereich: Allgemeines
Genre: Technik
Rubrik: Naturwissenschaften & Technik
Medium: Taschenbuch
ISBN-13: 9781138705456
ISBN-10: 1138705454
Sprache: Englisch
Ausstattung / Beilage: Paperback
Einband: Kartoniert / Broschiert
Autor: Self, Douglas
Hersteller: Routledge
Maße: 235 x 191 x 19 mm
Von/Mit: Douglas Self
Erscheinungsdatum: 21.08.2017
Gewicht: 0,643 kg
Artikel-ID: 126954231
Über den Autor

Douglas Self studied engineering at Cambridge University, then psychoacoustics at Sussex University. He has spent many years working at the top level of design in both the professional audio and hi-fi industries, and has taken out a number of patents in the field of audio technology. He currently acts as a consultant engineer in the field of audio design.

Inhaltsverzeichnis

Acknowledgements

Other Titles

Preface

Chapter 1: The Basics

Chapter 2: Passive Components

Chapter 3: Opamps and Their Properties

Chapter 4: Preamp Architecture

Chapter 5: Moving-Magnet Inputs: Phono Amp Architecture

Chapter 6: Signals from Vinyl: Levels and Limitations

Chapter 7: RIAA Equalisation

Chapter 8: Archival & Non-Standard Equalisation

Chapter 9: Moving-Magnet Inputs: Noise and Distortion

Chapter 10: Moving-Magnet Inputs: Discrete Circuitry

Chapter 11: Moving-Coil Head Amplifiers

Chapter 12: Subsonic Filtering

Chapter 13: Ultrasonic and Scratch Filtering

Chapter 14: Line Outputs

Chapter 15: Level Indication

Chapter 16: Power Supplies

Chapter 17: Moving-Magnet Inputs: Practical Designs

Appendix 1:Component Series E3-E96

Appendix 2: Phono Amplifier Articles in Linear Audio

Details
Erscheinungsjahr: 2017
Fachbereich: Allgemeines
Genre: Technik
Rubrik: Naturwissenschaften & Technik
Medium: Taschenbuch
ISBN-13: 9781138705456
ISBN-10: 1138705454
Sprache: Englisch
Ausstattung / Beilage: Paperback
Einband: Kartoniert / Broschiert
Autor: Self, Douglas
Hersteller: Routledge
Maße: 235 x 191 x 19 mm
Von/Mit: Douglas Self
Erscheinungsdatum: 21.08.2017
Gewicht: 0,643 kg
Artikel-ID: 126954231
Warnhinweis

Ähnliche Produkte

Ähnliche Produkte